Scale-N

Scale-N
Arduino
Componenten
Rollend Materieel
Naslag
Onderdelen
Wissels
Basis Electronica
Symbols Electronica
Programming Arduino
DCC++
DR5000
IC
Link













































SINGLE LETTER COMMANDS
  • < s > Lower Case s: DCC++ BaseStation Status Returns: Track power status,Throttle status, Turn-out status, and a version number.
  • < 0 > Number Zero: Turn Power OFF to tracks (Both Main & Programming). Returns: < p0 > Power to tracks OFF.
  • < 1 > Number One: Turn Power ON to tracks (Both Main & Programming). Returns: < p1 > Power to tracks ON.
  • < T > Upper Case T: Lists all defined turnouts. Returns: < H ID ADDRESS SUBADDRESS THROW > for each defined turnout or < X > if no turnouts defined.
  • < S > Upper Case S: Lists all defined sensors. Returns: < Q ID PIN PULLUP > for each defined sensor or < X > if no sensors defined.
  • < Z > Upper Case Z: Lists all defined output pins Returns: < Y ID PIN IFLAG STATE > for each defined output pin or < X > if no output pins defined
  • < Q > Upper Case Q: Lists Status of all sensors. Returns: < Q ID > (active) or < q ID > (not active)
  • < E > Upper case E: Command to Store definitions to EEPROM Returns: < e nTurnouts nSensors >
  • < e > Lower Case e: Command to Erase ALL (turnouts, sensors, and outputs) definitions from EEPROM Returns: < 0 > EEPROM Empty (There is NO Un-Delete)
  • < D > Upper Case D: Please See Diagnostics-< D >-Command Page There are a few other DeBugging commands in SerialCommand.cpp that should only be used by advanced users (Potentially Harmful if not used correctly).
Raijmaekers